Correo Electrónico
DNINFOA - SIA
Bibliotecas
Convocatorias
Identidad U.N.
Published
Surface quality in rapid prototype MMD process
Calidad superficial en el prototipado rápido, proceso FDM
DOI:
https://doi.org/10.15446/ing.investig.v24n3.14607Keywords:
acrylonitrile-butadin-styrene (ABS), microanalysis, rapid prototype, thermogram (en)acrilonitrilo-butadieno-estireno (ABS), microanálisis, prototipado rápido, termograma (es)
Downloads
This article summarizes a Manufacturing Materials and Processes MSc thesis written for the Mechanical and Electrical Engineering Department. The paper shows the interaction of process, gap (deposition distance) and extrusion terminal velocity modelled process parameters for CEIF’s (Centro de Equipos Interfacultades) rapid prototype molten material deposit (MMD) Titan SH-1 machine by analyzing prototypes improved surface quality and resistance to tension and characterizing material. The project applies experimental design criteria for orientating the selection of experimental process parameters. Acrylonitrile-butadin-styrene (ABS) had already been mechanically and physicochemically characterized (i.e. the material used in the MMD process).
Este artículo es una síntesis de la tesis de maestría en el Posgrado de Materiales y Procesos de Manufactura, del Departamento de Ingeniería Mecánica y Mecatrónica. El paper muestra la interacción de los parámetros del proceso, distancia de la deposición (Gap) y la velocidad del cabezal de extrusión, para la maquina Titán SH-1 de prototipado rápido, proceso de modelado por deposición fundida de material (FDM), del CEIF (Centro de Equipos Interfacultades), a través del análisis del mejoramiento en la calidad de la superficie y la resistencia a la tensión de los prototipos y la caracterización del material. El proyecto aplica criterios del diseño experimental para orientar la selección de los parámetros experimentales del proceso. Previamente se realiza la caracterización mecánica y fisico-química del Acrilinitrilo-Butadieno-Estireno (ABS) material utilizado en el proceso FDM.
References
Brent Strong, A. Plastic, Materials and Processing. Ed. Prentice Hall, New Jersey, 1996.
Montgomery, C. Douglas. Diseño y análisis de experimentos. Grupo Editorial Iberoamérica, México. 1991.
Montero Michael, Roundy Shad; Odell Dan; Ahn Hoon, Sung, and Wright K., Paul, Material Characterization of Fused Deposition. Material Characterization of Fused Deposition Modeling (FDM) ABS by Designed Experiments, University of California, Berkeley.
http://www.everandever.com/dan/publications/sme_rp_2001.pdf
Richardson & Lokensgard, Industria del plástico: plástico industrial, Editorial Paraninfo, Madrid, España, 2000.
Suh P. Nam, Axiomatic Design, Advances and Applications, Oxford University Press, New York, 2001.
How to Cite
APA
ACM
ACS
ABNT
Chicago
Harvard
IEEE
MLA
Turabian
Vancouver
Download Citation
CrossRef Cited-by
Dimensions
PlumX
Article abstract page views
Downloads
License
Copyright (c) 2004 Lisandro Vargas Henríquez, Ernesto Córdoba Nieto
This work is licensed under a Creative Commons Attribution 4.0 International License.
The authors or holders of the copyright for each article hereby confer exclusive, limited and free authorization on the Universidad Nacional de Colombia's journal Ingeniería e Investigación concerning the aforementioned article which, once it has been evaluated and approved, will be submitted for publication, in line with the following items:
1. The version which has been corrected according to the evaluators' suggestions will be remitted and it will be made clear whether the aforementioned article is an unedited document regarding which the rights to be authorized are held and total responsibility will be assumed by the authors for the content of the work being submitted to Ingeniería e Investigación, the Universidad Nacional de Colombia and third-parties;
2. The authorization conferred on the journal will come into force from the date on which it is included in the respective volume and issue of Ingeniería e Investigación in the Open Journal Systems and on the journal's main page (https://revistas.unal.edu.co/index.php/ingeinv), as well as in different databases and indices in which the publication is indexed;
3. The authors authorize the Universidad Nacional de Colombia's journal Ingeniería e Investigación to publish the document in whatever required format (printed, digital, electronic or whatsoever known or yet to be discovered form) and authorize Ingeniería e Investigación to include the work in any indices and/or search engines deemed necessary for promoting its diffusion;
4. The authors accept that such authorization is given free of charge and they, therefore, waive any right to receive remuneration from the publication, distribution, public communication and any use whatsoever referred to in the terms of this authorization.
